Brother MFC-L8850CDW Driver

The Brother MFC-L8850CDW, MFC-L8600CDW, and MFC-L9550CDW all employ the electrophotographic laser print technology, which utilizes a single pass for printing. These printers are equipped with 256 MB of RAM as well as an available slot for a DDR2 SO-DIMM with a capacity of up to 256 MB. The display component of these printers features a 4.85-inch diagonal liquid crystal display (LCD) color touchscreen.

Specifications

The printer’s power source requires an AC supply between 110 to 120 volts with 50/60 Hz frequency. The power consumption varies depending on the process, with an average usage of 1190 watts. During printing and copying, the power supply can reach up to 565 watts at 25⁰C. However, if you’re printing or copying in quiet mode, the power supply drops to approximately 375 watts at the same temperature.

When the printer is at an active mode, the power usage is about 65 watts at the same temperature. However, when the printer is at a sleep mode, the fair usage is about 10 watts and 0.02 watts when off. The printer’s dimensions include a width of 16.1, a depth of 19.8 inches and a height of about 19.4 inches. The weight of the printer is about 30.6 kg, which is about 67.4 lbs. The maximum noise from this printer is about 56dB during printing, and the minimum is approximately 4.05 B at active mode.

The acceptable range for operating temperature of the device is between 01 to 32⁰C, while the recommended storage temperature is between 0 and 40⁰C. It is important to note that the humidity should be maintained between 20 and 80% without any condensation, both during operation and storage.

For added convenience, the automatic document feeder (ADF) of the device can hold up to 50 pages of printed paper.

To access the Brother MFC-L8850CDW driver, simply visit the official Brother website and download the driver.